100m3 GRP Panel Sectioanal Water Tank
SMC plug-in water tank is a new type of products widely used across the world.It is developed by the Glass Re-enforced Plastics Research Institute under the National Building Materials Bureau,and designed by Beijing Institute of Architectural Design.The tank tackles the problems with heavy weight,leakage,and moss covering in concrete tanks,as well as corrosion and water pollution caused by dropped antirust coat in steel sheet tanks.It boats high water quality,no leakage,light weight,pleasant appearance,long service life,and convenient installation.
SMC plug-in water tank is applicable to public building such as public institutions,residential houses,hotels,restaurants,and schools.It can also serve as an indispensable storage facility.
GRP water tank features:
1.GRP is short of glass reinforcement plastic which is made of resin,fiber and calcium etc.
2.It is sectional structure and assembled by panels among 1000x1000mm,1000x500mm,500x500mm three sizes,customized according to the requirement.
3.GRP water tank is widely used in Building,hospital,bath center,water treatment,climate-drought region etc.
4.It is machine-molded product and all raw materials are environment friendly and hygienic to health.
| Project |
Performance index |
| Tensile strength,Mpa |
≥60 |
| Bending strength,Mpa |
≥100 |
| Bending modulus,Gpa |
≥7.0 |
| Pap hardness |
≥60 |
| Bibulous rate,% |
≥60 |
| Glass fiber content,% |
≥27.8 |
- High-performance material of resin and glass fiber are used to guarantee the product quality.
- It use special sealing strips and bolted connection for easy assembling.It is water and air tight.The internal tension-rod structure makes high mechanical property.
- Standard molded pressure plates are good for free assembling without hoisting operations.The physical form and holding capacity are easy to meet customer need.
How to correctly use fiberglass tanks?
1. Fiberglass tanks for the storage of drinking water at room temperature and the design and manufacture, please do not store hot water and other liquids (chemicals, oil, etc.)
2. On-site construction: pre-construction, install the stay requested by the foundation. Providing power and construction inspection seal with water.
3. To avoid water tank next to the fire: When welding operations, to take protective measures, not to splash the water tank panels Mars.
4. To prevent contaminants from flowing into the tank from the outside: for the convenience and safety of maintenance and inspection, the tank must leave some space around.
5. The molded fiberglass boards do not touch on the corners, do not beat something with hard tools.
6. In order to prevent expansion of the pipe, shrinkage, partial load and shock, glass steel water tank, outlet pipe must be of rubber around the streets (expansion joints), to take over the additional weight should be supported, not acting on the tank.
Welcoming your visit and customized design inquiry. We are professional Group Factory. We have completely service team and technical support team. Overseas help are available too. Any request freely inform me.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}